Splung.com Physics Forum
Discuss physics or ask questions. Part of the Splung.com physics web site.

Author Message
KansaiRobot

Joined: 13 Apr 2011
Posts: 1
Location: Japan

 Posted: Thu Apr 14, 2011 2:08 am    Post subject: Moment(torque) help (bycicle crankset) Hello everybody. I would appreciate your help in something I have been thinking all day (and now I am doing an allnighter, without result ) Please take a look at the pic at the end. It is a bycicle crankset. Now 1) There is a force sensor in the center. It can sense Fx, Fy and Fz and also Mx, My and Mz. (where F are forces and M moments (or torques)) 2) The rider applies a Total force (Ftot) in the pedal. This Total Force can be decomposed as (F"x, F"y, F"z)-> just a notation. My problem is that I have to find Ftot and the only data I have is the force and moments measured at the sensor. ---------------------------------- Now, I have done this so far: 1) I can see that Mz and Mx　are generated ONLY by F"y. So I guess I can find F"y quite easily: ||F"y||= ||Mz||/(radius of crank) 2) I can see that Mｙ is generated by BOTH F"x and F"z. ---------------------- Now how can I get F"x and F"z from My (torque data)??? On related notes what is the relationship between the forces at the pedal(F"x, F"y, F"z) and the forces at the sensor? (Fx, Fy, Fz) THIS is KEY I think! So far I am thinking that Fx and Fz are proportional (if not equal!??) to F"x and F"z. If that is the case I can find both by geomety from My only. Any help would be greatly appreciated. I am running late on a deadline, so I will be infintely grateful for your comments and help Thanks Kansai
hepcj

Joined: 23 Jun 2007
Posts: 125

 Posted: Thu Apr 14, 2011 10:35 am    Post subject: If have understood your question, then the forces applied at the pedal will be the same because the elements of crankshaft are part of a rigid structure. The torque generated at centre of rotation will be the force x the perpendicular distance to the centre of rotation. tau =F x r where the times symbol is the vector cross product. tau, F and r are vectors. F is the force, r is the distance from the centre of rotation. This will decompose into three equations one for each direction, although since it is a crankset of a bicycle you might consider only the torque generated in the plane of rotation of the crank as the other torques will be resisted by the crankset bearing.
 Display posts from previous: All Posts1 Day7 Days2 Weeks1 Month3 Months6 Months1 Year Oldest FirstNewest First
 All times are GMT Page 1 of 1

 Jump to: Select a forum Physics Forum----------------Physics Help. Ask a Physics ExpertPast Papers
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum